• SALE

    The Kel-Tec KSG410 is a .410 gauge model of the ever-popular KSG. It utilizes features from both the KSG and KS7. Those features include dual tubes from the KSG and fiber optic sights from the KS7. Other features of the KSG 410 shotgun include an 18.5″ barrel, a 3″ chamber, and a 14-round max capacity (depending on shell length, 10+1 - 3", 14+1 -2.5"). The Kel-Tec KSG is a simple and reliable pump action shotgun that takes advantage of advanced modern engineering in its bullpup design. The KSG 410 shotgun is able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. The max capacity of the KSG Kel Tec is quite impressive, with the dual-tube setup holding 5+5+1 (for 3″ shells). This capacity allows you to shoot more and reload less, dependable shooting at the range and in your home. The construction and features of the Kel-Tec KSG 410 are impressive as well. The shotgun includes top handle with M-LOK slots for accessories, as well as a soft rubber butt pad that helps tame any recoil. The Kel Tec KSG‘s receiver is made from hardened steel and the magazine tubes have been welded in place, providing you with the durability you need. The gun features a fixed bullpup-style stock and a pistol grip for control and maneuverability. This model features a tactical black finish. Whether you want it for the range, for competition, or for home defense, the KSG 410 is a great choice of tactical shotgun that will get the job done!

  • Out of stock
    SALE

    The Kel-Tec SUB-2000 is a self-loading carbine for pistol cartridges. The SUB-2000 has a greatly enhanced accuracy and extended range compared to a handgun. The superior precision is also very useful against small or partially covered targets at shorter range. The amount of training to master the SUB-2000 is only a fraction of that required for a handgun. The SUB-2000 has been developed from Kel-Tec’s highly successful SUB-9 rifle. Although retaining some features of the old rifle, the SUB-2000 is a completely new design. Emphasis has been put on consumer safety, but without impeding the performance. Polymers are used to a large extent, resulting in increased durability and reduced price. The bolt can be locked in the rear position by the operating handle. The main safety is of protected push bolt type disconnecting the trigger bar and interlocking the hammer and sear. By rotating the barrel upwards and back, the SUB-2000 can be reduced to a size of 16.25” x 7” to facilitate secure storage and utilize the internal deployment lock which is operated by a proprietary key. The rear sight is of aperture type and the fluorescent front sight can be adjusted for windage and elevation. The SUB-2000 can easily be disassembled for cleaning or inspection without tools.

    This 9mm SUB-2000 is configured with Glock 15-Round 9mm Magazines. $100 FACTORY REBATE CLICK HERE > SUB2000 $100 Rebate Promotion - KelTec (keltecweapons.com) FOR $100 REBATE SUBMISSION FORM THROUGH 3/1/2024

  • Out of stock
    SALE

    The Kel-Tec KSG410 is a .410 gauge model of the ever-popular KSG. It utilizes features from both the KSG and KS7. Those features include dual tubes from the KSG and fiber optic sights from the KS7. Other features of the KSG 410 shotgun include an 18.5" barrel, a 3" chamber, and a 14-round max capacity (depending on shell length). The Kel-Tec KSG is a simple and reliable pump action shotgun that takes advantage of advanced modern engineering in its bullpup design. The KSG 410 shotgun is able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. The max capacity of the KSG Kel Tec is quite impressive, with the dual-tube setup holding 5+5+1 (for 3" shells). This capacity allows you to shoot more and reload less, dependable shooting at the range and in your home. The construction and features of the Kel-Tec KSG 410 are impressive as well. The shotgun includes top handle with M-LOK slots for accessories, as well as a soft rubber butt pad that helps tame any recoil. The Kel Tec KSG's receiver is made from hardened steel and the magazine tubes have been welded in place, providing you with the durability you need. The gun features a fixed bullpup-style stock and a pistol grip for control and maneuverability. This model features a tactical black finish. Whether you want it for the range, for competition, or for home defense, the KSG 410 is a great choice of tactical shotgun that will get the job done!

  • Out of stock
    SALE

    If you’re in the market for a 17-round, compact .22LR pistol with more bells & whistles than a Christmas Day parade, then the P17 is definitely for you!

    At less than 14-ounces fully loaded, and barely longer than a dollar bill, the P17 is concealable for pretty much anyone. Just don’t forget it’s there when you need it! The threaded barrel, Picatinny-style accessory rail, ambidextrous safety, ambidextrous magazine release and three (3) 16rd magazines come standard. That’s a ton of value added in such a small package. And did we mention the price? Don’t let the small size fool you. This little pistol is a tack driver. The excellent trigger, fiber optic front sight and adjustable rear sight help you extend the P17’s range. It’s a handy little .22LR that builds confidence and burns bull’s eyes. Every tool has a purpose and having the right tool for the job sets you up for success. Its size, weight, and caliber are the perfect combination for training that new shooter in your life. For more experienced shooters looking to hone their skills, the P17 is also a great training tool for when you’re on a budget.

  • SALE

    The PMR-30 is a lightweight, full size pistol (.22WMR). The PMR-30 operates on a unique hybrid blow back/locked-breech system, allowing for the use of a wide variety of ammunition as it seamlessly adjusts depending on the pressure of the cartridge. It uses a flush fit, double stack Zytel nylon magazine with round count ports. The trigger is a crisp single action with an over travel stop. It has a thumb-activated ambidextrous safety lever. The slide locks back after the last shot and a manual slide lock lever is also provided. The slide and barrel are 4140 steel, the frame is 7075 aluminum. The grip, slide cover, trigger, mag release, and safety levers are glass reinforced nylon (Zytel). Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, urethane recoil buffer, and captive coaxial recoil springs. It has a fluted barrel for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin. This exclusive model has a Beautiful NORTHERN LIGHTS colored grip, frame, and slide cover finish with a black slide.

  • SALE

    Kel-Tec PMR-30 Black Pistol 4.3″ 30+1 22 Magnum (22WMR) MPN: PMR-30 UPC: 640832002676

    Original price was: $499.99.Current price is: $439.99.

    The slide and barrel of the PMR30 are 4140 steel, and the frame is 7075 aluminum.  Much like other Kel-Tec Pistols, the grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel).  The magazine is Also Zytel, and holds 30 rounds, with round count ports.

    Other features: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs.  PMR30 disassembles for cleaning by removal of a single pin.

  • Out of stock
    SALE

    The KS7 is designed for many applications, but it lends itself perfectly to home defense, back country hiking or anywhere you need a compact 12ga shotgun. Its intuitive, simple features, optional Picatinny-style rail and M-LOK accessory mounting solutions make it very versatile.  The KS7 might be short and slim on the outside, but it’s long under the hood. Its 18.5″ magazine tube holds 6+1 or 7+1 depending on your choice of shell size. The 18.5″ barrel gives you plenty of 12ga velocity to maximize the performance of your preferred loads.  At 1st glance, you’ll notice the KS7s throwback feature, the carry handle. Sometimes old ideas are reinvented to serve modern demands and that’s definitely the case here. The KS7 carry handle also doubles as a sighting solution and it comes standard. It shoulders nicely and the fiber optic bead sight immediately catches the eye. It’s not your grandpa’s shotgun, unless you buy it for him.  You get extra capacity and standard velocity in a shotgun that’s just over two feet long. How do we do it? We bullpup it. We kept the business end right where it’s supposed to be, but we took the party out back. With rear loading and downward ejection, we’re able to keep the KS7 a 12ga micro-beast that’s easy to handle.

  • Out of stock
    SALE

    RFB stands for Rifle Forward-ejecting Bullpup. Why forward-ejecting? Because it allows the RFB to be the first truly ambidextrous 7.62 NATO Bullpup ever developed. The patented, dual-extractor system maintains control of the case from the moment it leaves the magazine and upon firing, pulls the fired case from the chamber and lifts them to push them into an ejection chute above the barrel, where they exit. The Bullpup configuration and tilting-block mechanism allow the 18" model to be only 26.1" long, or as much as 14" shorter in overall length than its competitors with equal barrel lengths. Furthermore, the stock and mechanism cross-section is similar to a conventional rifle, in stark contrast to existing Bullpup rifles. The RFB is also the safest Bullpup ever developed because the breech is separated from the shooters face by two layers of 1.6 mm steel. In the highly unlikely event of a case rupture, gas expansion is directed downwards through the magazine well to protect the shooters head and face.

    Forward-ejecting allows the RFB to be the first truly ambidextrous 7.62 NATO Bullpup. The patented, dual-extractor system maintains control of the case from the moment it leaves the magazine and upon firing, pulls the fired case from the chamber and lifts them to push them into an ejection chute above the barrel, where they exit. The RFB is a short-stroke gas piston operated semi-automatic rifle in 7.62 mm NATO caliber. All controls are fully ambidextrous; the reciprocating operating handle can be switched to either side. The safety disconnects the trigger and blocks the hammer action. The Bullpup configuration and tilting-block mechanism allow the 18" model to be only 26.1" long, or as much as 14" shorter in overall length than its competitors with equal barrel lengths. The stock and mechanism cross-section is similar to a conventional rifle, in stark contrast to existing Bullpup rifles. The RFB is also the safest Bullpup developed because the breech is separated from the shooter's face by two layers of 1.6 mm steel. In the highly unlikely event of a case rupture, gas expansion is directed downwards through the magazine well to protect the shooters head and face. The barrel has a chrome-lined bore and chamber, threaded muzzle (5/8x24 TPI), and comes equipped with Keltec's A2-style Flash Hider. A Mil-Spec Picatinny rail is attached rigidly to the barrel. It accepts standard metric FAL type magazines which work "drop free" and do not need to be tilted in. One 20-round magazine is included, and the RFB comes with a two point sling that can be easily configured to suit the user's preference.

  • SALE

    The PMR-30 is a light weight, full size pistol chambered for the flat shooting .22Magnum cartridge (.22WMR). The PMR-30 operates on a unique hybrid blowback/locked-breech system. This operation system allows for the use of a wide variety of ammunition as it seamlessly adjusts between locked breach and blowback operation, depending on the pressure of the cartridge. It uses a double stack magazine of a new design that holds 30 rounds and fits completely in the grip of the pistol.

    The trigger is a crisp single action with an over travel stop. The manual safety is a thumb activated ambidextrous safety lever (up for SAFE, down for FIRE). The slide locks back after the last shot and a manual slide lock lever is also provided. The light, crisp trigger pull and fiber optic sights make the PMR-30 ideal for target shooting and hunting small game. Slide and barrel are 4140 steel, frame is 7075 aluminum. Grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel), much like other Kel-Tec Pistols. Magazine is Also Zytel and holds 30 rounds, with round count ports. Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs. The barrel is fluted for light weight and effective heat dissipation. PMR30 disassembles for cleaning by removal of a single pin.  This model features a Midnight Bronze Cerakote frame and blued slide.

  • Out of stock
    SALE

    Kel-Tec's RDB bullpup design provides a compact, well-balanced rifle featuring a revolutionary downwards ejection and fully ambidextrous controls, enabling it to be fired from both the dominant and non-dominant side.  The result is casings eject out of your line of sight for a truly ambidextrous, high performance rifle.  The RDB maintains a center of gravity over the grip assembly to facilitate ease of handling and balance.  It comes equipped with two integral MIL-STD-1913 Picatinny rails, located above the barrel and on the handguard for mounting accessories and multiple sling attachment points compatible with a hook-style swivel.  It is compatible with AR-15 style magazines.  This RDB model has a 20.5" barrel and a black finish.  It includes a 30-round magazine and 20 round magazine.  NOTE: Scope is not included.

  • Out of stock
    SALE

    Kel-Tec CMR-30 Rimfire Rifle Titanium 16.1″ 30+1 22 WMR 22 MAG MPN: CMR-30-CK-TTNM UPC: 640832006803

    Original price was: $849.99.Current price is: $676.99.

    Designed for compact, lightweight, low recoil accuracy, the CMR-30™ features a single action trigger, bolt stop, ambidextrous safety levers and magazine catch similar to the popular PMR-30 pistol. It also uses the same 30-round, .22WMR magazine. A collapsible stock reduces its 30.6" overall length to 22.7". The CMR-30 will redefine your idea of accuracy.

  • Out of stock
    SALE

    Kel-Tec PMR-30 PISTOL 4.3″ 30+1 22 MAG TAN HANDGUN MPN: PMR-30-CK-TAN UPC: 640832003314

    Original price was: $579.99.Current price is: $484.99.

    The slide and barrel of the PMR30 are 4140 steel, and the frame is 7075 aluminum. Much like other Kel-Tec Pistols, the grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel). The magazine is Also Zytel, and holds 30 rounds, with round count ports.

    Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs. PMR30 disassembles for cleaning by removal of a single pin.

  • Out of stock
    SALE

    Keltec P17 HANDGUN 3.93″ 17+1 22LR TAN PISTOL MPN: P17TAN UPC: 640832007923

    Original price was: $399.99.Current price is: $314.99.

    COMPACT At less than 14-ounces fully loaded, and barely longer than a dollar bill, the P17 is concealable for pretty much anyone. Just don’t forget it’s there when you need it! The threaded barrel, Picatinny-style accessory rail, ambidextrous safety, ambidextrous magazine release and three (3) 16rd magazines come standard. That’s a ton of value added in such a small package. And did we mention the price?

    ACCURATE Don’t let the small size fool you. This little pistol is a tack driver. The excellent trigger, fiber optic front sight and adjustable rear sight help you extend the P17’s range. It’s a handy little .22LR that builds confidence and burns bull’s eyes.

    VERSATILE Every tool has a purpose and having the right tool for the job sets you up for success. Its size, weight, and caliber are the perfect combination for training that new shooter in your life. For more experienced shooters looking to hone their skills, the P17 is also a great training tool for when you’re on a budget.

  • Out of stock
    SALE

    Kel-Tec Sub 2000 Rifle 16.25″ 17+1 9MM Blued Barrel Black Grip MPN: SUB2K9MPBBLKHC UPC: 640832006551

    Original price was: $779.99.Current price is: $539.99.

    The Kel-Tec SUB-2000 is a self-loading carbine for pistol cartridges. The SUB-2000 has a greatly enhanced accuracy and extended range compared to a handgun. The superior precision is also very useful against small or partially covered targets at shorter range. The amount of training to master the SUB-2000 is only a fraction of that required for a handgun. The SUB-2000 has been developed from Kel-Tec’s highly successful SUB-9 rifle. Although retaining some features of the old rifle, the SUB-2000 is a completely new design. Emphasis has been put on consumer safety, but without impeding the performance. Polymers are used to a large extent, resulting in increased durability and reduced price.

    The bolt can be locked in the rear position by the operating handle. The main safety is of protected push bolt type disconnecting the trigger bar and interlocking the hammer and sear. By rotating the barrel upwards and back, the SUB-2000 can be reduced to a size of 16” x 7” to facilitate secure storage and utilize the internal deployment lock which is operated by a proprietary key. The rear sight is of aperture type and the fluorescent front sight can be adjusted for windage and elevation. The SUB-2000 can easily be disassembled for cleaning or inspection without tools.

    *This 9mm SUB-2000 is configured with Smith & Wesson M&P 9mm Magazines*

  • Out of stock
    SALE

    Kel-Tec PMR-30 4.3″ 30+1 22 MAG TITANIUM FIBER OPTIC SIGHTS MPN: PMR-30-CK-TTNM UPC: 640832005011

    Original price was: $579.99.Current price is: $499.99.

    If you are looking for a pistol that holds 30 rounds of 22WMR then this is the gun for you!

    Slide and barrel are 4140 steel, frame is 7075 aluminum. Grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel), much like other Kel-Tec Pistols. Magazine is Also Zytel and holds 30 rounds, with round count ports.

    Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs. PMR30 disassembles for cleaning by removal of a single pin.

  • Out of stock
    SALE

    At less than 14-ounces fully loaded, and barely longer than a dollar bill, the P17 is concealable for pretty much anyone. Just don't forget its there when you need it! The threaded barrel, Picatinny-style accessory rail, ambidextrous safety, ambidextrous magazine release and three (3) 16rd magazines come standard. That's a ton of value-added in such a small package.

  • Out of stock
    SALE

    Kel-Tec CMR-30 16.1″ 30+1 22WMR 22 MAG MPN: CMR30BLK UPC: 640832004618

    Original price was: $699.99.Current price is: $569.99.

    The Kel-Tec CMR-30 Rifle is chambered for the .22WMR cartridge (22 Magnum). The design is a rifle version of the popular Kel-Tec PMR-30 pistol. The same 30 round magazines are used. The single action trigger mechanism, bolt stop, ambidextrous safety levers, and mag catch are also identical. The CMR-30 rifle includes a collapsible stock and the 16” barrel is threaded 1/2”-28 to accept many different muzzle attachments. The multi-position collapsible stock allows for a short overall length of 22.7” with the stock collapsed, and 30.6” when extended. The long top picatinny rail will accept a multitude of different optics, and the removable under picatinny rail is included. The ambidextrous operating handles are non-reciprocating and latch in the forward position. The stock latch lever is also ambidextrous and located just in front of the trigger guard. An integral sling loop is included near the rear of the grip, on both sides.  The CMR-30 is constructed of hard-coat anodized aluminum for the upper assembly and rails and houses the steel barrel. The collapsible stock is made with aluminum stock rods, and a nylon butt plate. The stock was designed to have a natural cheek weld when extended. The grip, mag catch, safety levers, stock latch, and operating handles are made of glass reinforced nylon (Zytel). The grip houses the frame which is made of aluminum. The bolt assembly houses a captive recoil spring assembly. Magpul® flip-up sights included.  The extensive use of aluminum, and a lock time lower than most bolt action rifles makes the CMR-30 a very accurate rifle.

  • Out of stock
    SALE

    Kel-Tec KSG Black 12 Gauge Shotgun 18.50″ 3″ CHAMBER 14+1 12 GA MPN: KSGBLK UPC: 640832003192

    Original price was: $1,199.99.Current price is: $794.99.

    Kel-Tec's KSG is a simple and reliable pump action shotgun able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. The KSG holds 6+6+1 (or 7+7+1 depending on shell length.The pump includes top and bottom Picatinny rails to mount accessories and optics. The soft rubber butt pad helps to tame recoil. The KSG receiver is made from hardened steel and the magazine tubes have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out two pins, which store in two holes in the grip when removed. It has built-in forward and rear sling loops, and includes a basic sling.

  • Out of stock
    SALE

    Kel-Tec RDB Rifle Downward Ejection Bullpup 17.4″ 30+1 5.56 NATO|223 BLACK MPN: RDBBLK UPC: 640832005943

    Original price was: $1,399.99.Current price is: $1,199.99.

    Like no ordinary bullpup, the RDB series of rifles redefines the platform. You’ve never experienced balance or a trigger quite like this in any other design. The RDB is completely ambidextrous due to its patented downward-ejection, magazine catch/release placement, intuitive safety and reversible operating handle. The RDB series of bullpups delivers a 5.56/.223 ballistic advantage in a very compact package that’s easy to manipulate for just about anyone.

  • Out of stock
    SALE

    Kel-Tec Sub-2000 Rifle (ACCEPTS GLOCK-G17 MAGS) 16.1 17+1 9MM MPN: SUB-2K9G1717 UPC: 640832004182

    Original price was: $698.99.Current price is: $449.99.

    WE HAVE GLOCK 17 - 33 ROUND AND 40 ROUND MAGAZINES THAT WILL FIT THIS GUN IN STOCK. EXTRA MAGAZINES ARE $40 AT TIME OF PURCHASE! IF INTERESTED IN ADDING ONE TO YOUR ORDER WITH NO EXTRA SHIPPING CHARGES, GIVE US A CALL AT 816-296-3215! 

    Kel-Tec's semi-automatic Sub-2000 is a rifle chambered for pistol cartridges and can accept most double column handgun magazines. The Sub-2000 is classified as a "sub-rifle" because of its small size, light weight, and the use of a pistol cartridge. It is intended as a compliment to the handgun with which it would have full interchangeability in ammunition and magazines. Easily be disassembled for cleaning or inspection without tools, it is ideal for backpacking trips and situations where space and convenience are paramount. By rotating the barrel upwards and back, the Sub-2000 can be instantly reduced to a size of 16.25" x 7" for ease of storage. The Sub-2000 has a 3-position stock providing an adjustable LOP (13-14.25"), and two integrated Picatinny rails on the forend for mounting accessories. The ergonomic charging handle is located under the bolt tube for ambidextrous operation. It has a ghost ring rear sight and an adjustable front sight with a removable T6 6061 aluminum housing. This model comes with a 17-round magazine. It is compatible with Glock 17 mags.

     
  • Out of stock
    SALE

    Kel-Tec KS7 18.5″ 7+1 12 Gauge PUMP ACTION SHOTGUN MPN: KS7BLK UPC: 640832007787

    Original price was: $799.99.Current price is: $649.99.

    The KS7 is designed for many applications, but it lends itself perfectly to home defense, back country hiking or anywhere you need a compact 12ga shotgun. Its intuitive, simple features, optional Picatinny-style rail and M-LOK accessory mounting solutions make it very versatile.

    The KS7 might be short and slim on the outside, but it’s long under the hood. Its 18.5″ magazine tube holds 6+1 or 7+1 depending on your choice of shell size. The 18.5″ barrel gives you plenty of 12ga velocity to maximize the performance of your preferred loads.

    At 1st glance, you’ll notice the KS7s throwback feature, the carry handle. Sometimes old ideas are reinvented to serve modern demands and that’s definitely the case here. The KS7 carry handle also doubles as a sighting solution and it comes standard. It shoulders nicely and the fiber optic bead sight immediately catches the eye. It’s not your grandpa’s shotgun, unless you buy it for him.

    You get extra capacity and standard velocity in a shotgun that’s just over two feet long. How do we do it? We bullpup it. We kept the business end right where it’s supposed to be, but we took the party out back. With rear loading and downward ejection, we’re able to keep the KS7 a 12ga micro-beast that’s easy to handle.

  • Out of stock
    SALE

    The .22 target pistol market needed an update, so Kel-Tec answered the call with the CP33. CP stands for Competition Pistol and 33, well… it holds a staggering 33 rounds in each magazine, right out of the box.

    Equipped with a Picatinny-style top rail and a MAGPUL® ‎M-LOK® slot built into the dust cover, the CP33 is ready to accept your favorite optics and accessories. Train, compete, plink and repeat. If you’d like to do it quietly, simply attach your favorite .22 suppressor.

    As ambidextrous  as this handgun can be, the CP33 offers a safety lever on both sides of the grip, a heel catch magazine release and a unique charging handle located at the back of the receiver.

    Adjustable fiber optic sights, 9 inch sight radius and threaded barrel come standard, making short work of bullseyes and paper bad guys.

    The CP33 magazines are quite the engineering feat. Generally, the term quad stack refers to magazine carriers… not here. Each CP33 magazine holds 4 rows of .22lr, allowing for serious flush-fit firepower. That’s 66 rounds of fun right out of the box.

  • Out of stock
    SALE

    Kel-Tec KSG TAN 18.5″ 12+1 12 Gauge Pump Action Shotgun MPN: KSG-CK-TAN UPC: 640832003291

    Original price was: $999.99.Current price is: $894.99.

    This simple and reliable pump action feeds from either the left or right tube. The feed side is manually selected by a lever located behind the trigger guard.

    The pump includes an under picatinny rail for the mounting of a forward grip, a light, or a laser. The included top picatinny sight rail will accept many types of optics or iron sights. Forward and rear sling loops are built in, and a basic sling is included. The soft rubber butt pad helps to tame recoil.

    The KSG receiver is made from hardened steel and includes the magazine tubes which have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out 2 pins, which store in 2 holes in the grip when removed. The barrel and pump assembly is removed by loosening the 2 front magazine tube nuts with a coin and sliding the assembly forward.

Go to Top