The Kel-Tec KSG410 is a .410 gauge model of the ever-popular KSG. It utilizes features from both the KSG and KS7. Those features include dual tubes from the KSG and fiber optic sights from the KS7. Other features of the KSG 410 shotgun include an 18.5″ barrel, a 3″ chamber, and a 14-round max capacity (depending on shell length, 10+1 - 3", 14+1 -2.5"). The Kel-Tec KSG is a simple and reliable pump action shotgun that takes advantage of advanced modern engineering in its bullpup design. The KSG 410 shotgun is able to feed from either the left or right tube, with a manual feed side selector lever located behind the trigger guard. The max capacity of the KSG Kel Tec is quite impressive, with the dual-tube setup holding 5+5+1 (for 3″ shells). This capacity allows you to shoot more and reload less, dependable shooting at the range and in your home. The construction and features of the Kel-Tec KSG 410 are impressive as well. The shotgun includes top handle with M-LOK slots for accessories, as well as a soft rubber butt pad that helps tame any recoil. The Kel Tec KSG‘s receiver is made from hardened steel and the magazine tubes have been welded in place, providing you with the durability you need. The gun features a fixed bullpup-style stock and a pistol grip for control and maneuverability. This model features a tactical black finish. Whether you want it for the range, for competition, or for home defense, the KSG 410 is a great choice of tactical shotgun that will get the job done!
-
Out of stock
The KS7 is designed for many applications, but it lends itself perfectly to home defense, back country hiking or anywhere you need a compact 12ga shotgun. Its intuitive, simple features, optional Picatinny-style rail and M-LOK accessory mounting solutions make it very versatile. The KS7 might be short and slim on the outside, but it’s long under the hood. Its 18.5″ magazine tube holds 6+1 or 7+1 depending on your choice of shell size. The 18.5″ barrel gives you plenty of 12ga velocity to maximize the performance of your preferred loads. At 1st glance, you’ll notice the KS7s throwback feature, the carry handle. Sometimes old ideas are reinvented to serve modern demands and that’s definitely the case here. The KS7 carry handle also doubles as a sighting solution and it comes standard. It shoulders nicely and the fiber optic bead sight immediately catches the eye. It’s not your grandpa’s shotgun, unless you buy it for him. You get extra capacity and standard velocity in a shotgun that’s just over two feet long. How do we do it? We bullpup it. We kept the business end right where it’s supposed to be, but we took the party out back. With rear loading and downward ejection, we’re able to keep the KS7 a 12ga micro-beast that’s easy to handle.
-
Out of stock
The slide and barrel of the PMR30 are 4140 steel, and the frame is 7075 aluminum. Much like other Kel-Tec Pistols, the grip, slide cover, trigger, mag release, and safety levers are glass reinforced Nylon (Zytel). The magazine is Also Zytel, and holds 30 rounds, with round count ports.
Other features include: dual opposing extractors for reliability, heel magazine release to aid in magazine retention, dovetailed aluminum front sight, Picatinny accessory rail under the barrel, Urethane recoil buffer, captive coaxial recoil springs. PMR30 disassembles for cleaning by removal of a single pin.
-
Out of stock
COMPACT At less than 14-ounces fully loaded, and barely longer than a dollar bill, the P17 is concealable for pretty much anyone. Just don’t forget it’s there when you need it! The threaded barrel, Picatinny-style accessory rail, ambidextrous safety, ambidextrous magazine release and three (3) 16rd magazines come standard. That’s a ton of value added in such a small package. And did we mention the price?
ACCURATE Don’t let the small size fool you. This little pistol is a tack driver. The excellent trigger, fiber optic front sight and adjustable rear sight help you extend the P17’s range. It’s a handy little .22LR that builds confidence and burns bull’s eyes.
VERSATILE Every tool has a purpose and having the right tool for the job sets you up for success. Its size, weight, and caliber are the perfect combination for training that new shooter in your life. For more experienced shooters looking to hone their skills, the P17 is also a great training tool for when you’re on a budget.
-
Out of stock
The Kel-Tec CMR-30 Rifle is chambered for the .22WMR cartridge (22 Magnum). The design is a rifle version of the popular Kel-Tec PMR-30 pistol. The same 30 round magazines are used. The single action trigger mechanism, bolt stop, ambidextrous safety levers, and mag catch are also identical. The CMR-30 rifle includes a collapsible stock and the 16” barrel is threaded 1/2”-28 to accept many different muzzle attachments. The multi-position collapsible stock allows for a short overall length of 22.7” with the stock collapsed, and 30.6” when extended. The long top picatinny rail will accept a multitude of different optics, and the removable under picatinny rail is included. The ambidextrous operating handles are non-reciprocating and latch in the forward position. The stock latch lever is also ambidextrous and located just in front of the trigger guard. An integral sling loop is included near the rear of the grip, on both sides. The CMR-30 is constructed of hard-coat anodized aluminum for the upper assembly and rails and houses the steel barrel. The collapsible stock is made with aluminum stock rods, and a nylon butt plate. The stock was designed to have a natural cheek weld when extended. The grip, mag catch, safety levers, stock latch, and operating handles are made of glass reinforced nylon (Zytel). The grip houses the frame which is made of aluminum. The bolt assembly houses a captive recoil spring assembly. Magpul® flip-up sights included. The extensive use of aluminum, and a lock time lower than most bolt action rifles makes the CMR-30 a very accurate rifle.
-
Out of stock
WE HAVE GLOCK 17 - 33 ROUND AND 40 ROUND MAGAZINES THAT WILL FIT THIS GUN IN STOCK. EXTRA MAGAZINES ARE $40 AT TIME OF PURCHASE! IF INTERESTED IN ADDING ONE TO YOUR ORDER WITH NO EXTRA SHIPPING CHARGES, GIVE US A CALL AT 816-296-3215!
Kel-Tec's semi-automatic Sub-2000 is a rifle chambered for pistol cartridges and can accept most double column handgun magazines. The Sub-2000 is classified as a "sub-rifle" because of its small size, light weight, and the use of a pistol cartridge. It is intended as a compliment to the handgun with which it would have full interchangeability in ammunition and magazines. Easily be disassembled for cleaning or inspection without tools, it is ideal for backpacking trips and situations where space and convenience are paramount. By rotating the barrel upwards and back, the Sub-2000 can be instantly reduced to a size of 16.25" x 7" for ease of storage. The Sub-2000 has a 3-position stock providing an adjustable LOP (13-14.25"), and two integrated Picatinny rails on the forend for mounting accessories. The ergonomic charging handle is located under the bolt tube for ambidextrous operation. It has a ghost ring rear sight and an adjustable front sight with a removable T6 6061 aluminum housing. This model comes with a 17-round magazine. It is compatible with Glock 17 mags.
-
Out of stock
The KS7 is designed for many applications, but it lends itself perfectly to home defense, back country hiking or anywhere you need a compact 12ga shotgun. Its intuitive, simple features, optional Picatinny-style rail and M-LOK accessory mounting solutions make it very versatile.
The KS7 might be short and slim on the outside, but it’s long under the hood. Its 18.5″ magazine tube holds 6+1 or 7+1 depending on your choice of shell size. The 18.5″ barrel gives you plenty of 12ga velocity to maximize the performance of your preferred loads.
At 1st glance, you’ll notice the KS7s throwback feature, the carry handle. Sometimes old ideas are reinvented to serve modern demands and that’s definitely the case here. The KS7 carry handle also doubles as a sighting solution and it comes standard. It shoulders nicely and the fiber optic bead sight immediately catches the eye. It’s not your grandpa’s shotgun, unless you buy it for him.
You get extra capacity and standard velocity in a shotgun that’s just over two feet long. How do we do it? We bullpup it. We kept the business end right where it’s supposed to be, but we took the party out back. With rear loading and downward ejection, we’re able to keep the KS7 a 12ga micro-beast that’s easy to handle.
-
Out of stock
This simple and reliable pump action feeds from either the left or right tube. The feed side is manually selected by a lever located behind the trigger guard.
The pump includes an under picatinny rail for the mounting of a forward grip, a light, or a laser. The included top picatinny sight rail will accept many types of optics or iron sights. Forward and rear sling loops are built in, and a basic sling is included. The soft rubber butt pad helps to tame recoil.
The KSG receiver is made from hardened steel and includes the magazine tubes which have been welded in place. The grip and stock assembly is made of glass reinforced nylon (Zytel) and is easily disassembled by pushing out 2 pins, which store in 2 holes in the grip when removed. The barrel and pump assembly is removed by loosening the 2 front magazine tube nuts with a coin and sliding the assembly forward.