• SALE

    The new Daniel Defense DDM4V9 is designed to satisfy the needs of modern shooters not only in popular shooting sports but also for tactical and defensive applications. The long, 15” DDM4 quad rail over a 16” cold hammer forged Government profile barrel gives the operator the option to have the support hand extended out close to the muzzle allowing them to drive the gun more precisely and preventing over travel when transitioning between multiple targets. This combined with our mid-length gas system which is known to have a smoother recoil impulse allows for quick but precise rapid fire. The longer rail also affords the shooter plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights. This rifle also comes with the newly designed, rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

  • SALE

    This highly maneuverable pistol pairs a 10.3” barrel and the MFR 9.0 rail for fast handling, accuracy, and reliability while also providing compatibility with a wide variety of muzzle devices and sound suppressors for even more customization. A variation of the DDM4V7 S, it features the SB Tactical SOB Pistol Stabilizing Brace and is classified as a pistol, not a short-barreled rifle, so it does not require ATF approval and a tax stamp. The Daniel Defense DDM4V7 P features M-LOK attachment technology and comes equipped with a rugged and comfortable Daniel Defense pistol grip with integral trigger guard and soft touch overmolding.

    Materials & Construction

    • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
    • RECEIVER EXTENSION: AR Pistol Receiver Extension
    • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ S2W Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
    • GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Pistol Length, Direct Impingement
    • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
    • BOLT CARRIER GROUP: M16 Profile, Chrome Lined, Mil-Spec MP Tested, Properly Staked Gas Key
    • BUFFER: H Buffer
    • HANDGUARD: MFR 9.0 M-LOK, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, Black
    • BRACE: SB Tactical SOB Pistol Stabilizing Brace
    • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
    • Made in the USA!
  • SALE

    The Daniel Defense V7 is the first rifle in the DDM4 lineup to feature the M-LOK® attachment technology with the Daniel Defense MFR XS 15.0 rail. Built around a Cold Hammer Forged, 16” barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. A free-floating MFR XS 15.0 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 6 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

  • SALE

    CZ-USA Bren 2 MS TACTICAL SEMI-AUTO Pistol 11″ 30+1 5.56 NATO/223 REM MPN: 91451 UPC: 806703914510

    Original price was: $2,199.99.Current price is: $1,960.15.

    The Bren 2 MS makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun. Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are ambidextrous. In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest, or similar pistol stabilizing device. AR-15 style magazines are used for 223 variants; all variants are swappable to different barrel lengths and chamberings and also feature a modular for-end that can be swapped to different lengths.  In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.

  • SALE

    The CASCADE is CVA’s first ever bolt-action centerfire rifle. Long the leader in both muzzle-loading rifles and single-shot centerfires, CVA has applied it’s nearly 50 years of experience into making what we feel to be the best bolt-action on the market.  The CASCADE’s 4140 carbon steel threaded barrel is finished in a rich, Cerakote Flat Dark Earth. The Cascade series features a threaded muzzle, making it ready for a brake or suppressor whenever you are. The bolt design incorporates a 70° throw for smooth and fast operation, plus generous scope clearance. The two-position safety is conveniently located for natural and instantaneous operation. And loading is a breeze with its four-round, flush-fit, detachable magazine (extra magazines available from CVA).  The CVA Cascade Bolt Action rifle is crafted with some of the finest engineering in the modern shooting market. This gun is chambered for .223 Remington. The 22" barrel allows for swift maneuverability. This rifle also features a 4+1 magazine. Don't pass up owning a fine CVA Cascade Bolt Action rifle, get yours today at Missouriguns.net!

  • SALE

    The Colt Midlength Carbine offers excellent precision and performance with a dependable, lightweight, and a durable rifle design. It comes chambered in 5.56 NATO with a 16.1 inch barrel. Features include an adjustable stock, an optics ready flat-top, an M-LOK handguard, and a 30 round magazine.

  • SALE

    CIVILIAN FORCE ARMS DAKOTA 15 AR15 AR-15 PACKAGE WITH BIPOD, HARDCASE, MPN: DAKOTA-15 UPC: 005012014373

    Original price was: $1,899.99.Current price is: $1,399.99.

    CIVILIAN FORCE ARMS DAKOTA-15 RIFLE •M16 full-auto BCG w/nitride finish •Velocity drop-in trigger •VLTR/BCM Mod4 charging handle •Fortis REV™ 2 14.8" 1-pc free-float M-LOK™ rail system w/Picatinny top rail •Straight flute heavy barrel •Chrome-lined 4150 CMV 11595E steel barrel w/Melonite finish, M4 profile •Phantom 3102 flash hider •Low-profile gas block (.750) •Magpul® PRS® precision adjustable stock •Includes CAA bipod •Wt.: 8.2 lbs.

  • SALE

    Christensen Arms CA10290113522: This Christensen Arms CA-15 is undoubtedly one of the best AR-15 rifles on the market today. This model is chambered in the readily available .223/5.56 and is capable of producing Sub MOA groups with premium ammunition. This model also features an incredibly lightweight carbon fiber M-LOK handguard that saves weight and is ready to accept any accessories of your choosing. This model is also optics ready. This CA-15 rifle features a Burnt Bronze Cerakote finish and trust us. It looks as good as it shoots.

  • SALE

    Christensen Arms' CA-15 G2 series of modern sporting rifles is feature-rich, utilizing CA's trademark carbon fiber in critical components to reduce weight (weighs in at ONLY 5.8 lbs.) and increase structural integrity. This is particularly relevant to AR15-type rifles such as these, which tend to be front-heavy due to the use of long, heavy, metal handguards. Barrel mass is also a consideration; in a traditional AR15-type rifle, the shooter must balance their desired muzzle velocity with the weight that will be impacted by a longer, heavy-contour steel barrel. The CA-15 series, in general, alleviates this issue by offering models with a composite barrel (button-rifled, 416R stainless steel, wrapped in Aerograde carbon fiber). The result is a target-contour barrel that weighs considerably less than shorter, all-steel barrels of the same (or even thinner) contour. These features yield a light-weight, high-precision semi-automatic rifle which is, in the case of the G2 series, available from the factory chambered in .223 Wylde, enabling the safe use of 5.56 NATO and .223 Remington ammunition. All G2 rifles have a sub-MOA guarantee.

  • SALE

    This beautiful and unique offering starts with Black Rain's precision manufactured 7075-T6 billet machined receiver set, mated to a high-endurance 16" 4150 cromoly barrel, slim flash hider, housed inside of our ultra-thin profile 15" Slim M-LOK® for end. Forged charging handle, salt bath nitride BCG, Mil-Spec GI trigger, and Mission First Tactical®'s popular and lightweight Minimalist buttstock and A2 pistol grip. Finished in Cerakote® Shimmer Aluminum, which is hand sanded to a rugged Burnt Bronze Battleworn finish, highlighting the distinctive deep relief laser engraved "We The People" logo spanning the left upper and lower receiver.  Add one now to your collection from missouriguns.net before they are gone!

     
  • SALE

    VERY HARD TO FIND!

    This elaborately finished and engraved rifle honors the patriotism of the 45th President, and his determination to “Keep America Great”. This motto is engraved on the right side of the upper receiver, and “The United States of America” on the aluminum free floated, M-Lok forearm. The left side of the upper receiver is engraved with President Trump’s name and title, “Commander in Chief” of the Armed Forces. The lower receiver has beautiful relief cuts, along with “45th” noting his position in our nation’s long line of presidents. The American flag, and a star pattern are detailed on the grip and forearm. The president’s likeness in front of the White House adorn the left magazine well, with the Presidential Seal on the right. “In God We Trust” is placed on the forward assist housing. Each Commander in Chief AR15 is built on billet aluminum upper and lower receivers. The pistol grip and stock are by Hogue. The finish is Burnt Bronze and Black Cerakote. The rifle barrel is 16”, 1 in 8 twist, nitride coated, and chambered in 5.56 NATO (ALSO SHOOTS 223 Remington!). One 30 round Magpul P-Mag is included.

  • SALE

    The all new Omni Hybrid Maxx features a fully-patented metal reinforced polymer upper receiver along with a fully-patented metal reinforced polymer lower receiver.  The Omni Hybrid lower features a patented hammer and trigger pin retainment system, preventing movement from the hammer and trigger pin during firing.  The Omni Hybrid also featured a patented over-molded metal insert, which reinforces the buffer tube housing and rear takedown pin.  This allows for metal-on-metal contact with both the buffer tube as well as the rear takedown pin thus increasing strength and durability from recoil and consistent firing.

  • SALE

    The AM15-BR, 5.56 16″ – With manufacturing all parts at Anderson Manufacturing, they are able to offer you Affordable, American Made, Quality for Less! Just add an optic of your choice and you are ready to take on range day! Unlike other entry level rifles, the AM15-BR has the forward assist and dust cover!

  • SALE

    The Optic Ready AR from Anderson is chambered in .223/5.56 and has a 16” Chrome Moly Vanadium Steel M4 contour barrel with a 1-8 twist. This Optic Ready model also features a Forged Receiver, A2 Hand Guard, 6 position butt stock, A2 pistol grip, A2 Flash Hider, Anderson’s proprietary 17-4 stainless steel match grade Trigger & Hammer, Standard Charging Handle, Single point sling mount, and a thirty round magazine.

  • SALE

    The Milsport AR15 Pistol from American Tactical features a Milsport Aluminum upper & lower receiver. The 7.5" barrel features a 1:7" twist rate, and is enclosed in an M-LOK handguard. Each pistol comes with one 30-round magazine.

  • SALE

    Working with the Israeli Military, American Tactical was able to de-mil former Israeli Military issued Galil rifles and import their parts to the USA.  Using solid 4140 CDA Steel, American Tactical’s machining division is milling all new US receivers and performing all finishing and final assembly at the SC production facility.  Featuring new manufactured US made barrels, and the always reliable TAPCO Galil magazine, these US assembled guns meet all legal requirements right out of the box.

    PISTOL BRACE HAS BEEN REMOVED TO COMPLY WITH NEW ATF RULE ON STABILIZER BRACES, THIS ITEM WILL ONLY HAVE A BUFFER TUBE, NO STABILIZING BRACE!

  • SALE

    The 223 Wylde caliber Alex Pro Firearms Slim Carbine is a compelling, well-balanced gun that packs rich features into an affordable package that includes a 16” barrel, and A2 birdcage flash hider. This Slim Carbine has an M16 nitrided bolt carrier group and a carbine-length gas system. These work in conjunction with a 16” long phosphate finished barrel made of 4140 chrome moly alloy. The 1:9” twist ratio barrel has a M4 contour. Surrounding the barrel is a short M-LOK slot handguard. This Slim Carbine has a single-stage mil-spec trigger. The standard A2 pistol grip is an inexpensive polymer classic that features checkering on the sides and long vertical serrations at the back. The APF (Alex Pro Firearms) Slim FF Carbine delivers high performance, reliability, and accuracy in a durable AR-15 platform. It comes chambered in 5.56 Nato / .223 Wylde / 223 Remington with a 16" barrel. Features include an A2 birdcage muzzle device, a mil-spec 6 position stock and a mil-spec A2 grip, a 15" free float handguard, and a burnt bronze finish. APF (Alex Pro Firearms) PRODUCTS ARE 100% MADE IN THE USA TO ENSURE THAT YOU ARE GETTING THE BEST PRODUCTS ON THE MARKET. THESE PRODUCTS ARE MANUFACTURED AND TESTED TO THE HIGHEST QUALITY STANDARDS BY THE AMERICAN WORK FORCE.

  • SALE

    APF firearms are made in America's heartland by craftsmen passionate about firearms the outdoors and supporting our nation's law enforcement agencies. Whether in the field or on the range APF builds the caliber you want and offers an array of unique finishes and accessories to bring you the perfect rifle. This beautiful AR-15 is finished with the Polar Blue super cool finish and one you will want to have in your arsenal today!

  • SALE

    APF firearms are made in America's heartland by craftsmen passionate about firearms the outdoors and supporting our nation's law enforcement agencies. Whether in the field or on the range APF builds the caliber you want and offers an array of unique finishes and accessories to bring you the perfect rifle. This beautiful AR-15 is finished with the Mermaid finish, Purples/ Pinks / Blues (Multiple Color - Changes in different lighting conditions) super cool finish and one you will want to have in your arsenal today!

  • SALE

    APF firearms are made in America's heartland by craftsmen passionate about firearms the outdoors and supporting our nation's law enforcement agencies. Whether in the field or on the range APF builds the caliber you want and offers an array of unique finishes and accessories to bring you the perfect rifle. This beautiful AR-15 is finished with the Robin's Egg Blue super cool finish and one you will want to have in your arsenal today!

Go to Top